BD Diesel Warranty

BD Engine Brake LIMITED WARRANTY STATEMENT
BD Engine Brake, Inc., Valley Fuel Injection Ltd., BD Diesel Performance, Turbocharger.net (the
“Seller”) warrants the following product(s):
All products manufactured or rebuilt by the Seller are to be free from defects in material or
workmanship which includes but is not limited to Turbochargers, Exhaust and Intake manifolds,
Exhaust brakes, Intercoolers, Flex Plates, Transmissions, Torque Converters, Oil pans, Fuel
pumps and systems, Electronic monitors and control systems. The Seller warrants to the original
buyer of the product (the “Buyer”) that it will repair or replace, free of charge, any product which
has a defect in material or workmanship within the warranty period described below. Copy of
original invoice is required to qualify for warranty.
A defect is defined as a condition within the product that would render the product inoperable
under normal conditions of use and service. The Seller’s responsibility under this Warranty is
limited to the repair or replacement, at the Seller’s option, of any warrantable product returned
prepaid with a complete service history and proof of purchase. A valid proof of purchase is a
dated bill of sale or receipt.
A Return Material Authorization (RMA) number, obtained in advance from a customer service
representative of the Seller and the dated bill of sale or receipt, must accompany any product
returned by the Buyer for warranty determination. The Seller will be the final authority on the
approval of all warranty claims hereunder. The issuance of a RMA number does not represent
an approval of a warranty claim. All repaired or replaced products will be returned to the Buyer
freight collect. Accepted warranty products, which have been replaced, will become the sole
property of the Seller.
Until the Seller has approved a warranty claim, the Buyer will be responsible for all costs.
Replacement parts and the labor costs incurred by the removal and replacement of the product
while performing warranty work will be the responsibility of the Buyer. In no case does the
obligation of the Seller exceed the original purchase price of the product as indicated on the
original bill of sale or receipt. Under no circumstances will the Seller be liable for any travel time
incurred in diagnosis for defects, or any other contingent expenses.
Only once the claim is approved, and depending on if the warrantable product is eligible, labor
costs will be considered for the removal and replacement if an eligible part at an hourly rate of
$70.00 per hour. The end user may be responsible for the difference between the BD warranty
labor rate and the authorized service dealer’s labor rate. BD highly recommends the end user
negotiate these conditions before the service is performed. As well the end user maybe
responsible for additional freight charges from FOB Abbotsford, BC / Sumas, WA.
To the extent permitted by law, the Buyer hereby waives all rights other than those expressly set
out herein and acknowledges that this warranty sets out the Buyer’s exclusive remedies with
respect to products covered by it. This warranty shall not be extended, amended or varied
except by written instrument signed by the Seller and the Buyer. If the buyer replaces the
product from the Seller with another from another manufacturer, the Buyer-Seller warranty
contract is void and the RMA Claim will be terminate. Any claim for remuneration will be
rejected.
The Seller will administer warranty requests on products sold by the Seller and not
manufactured by the Seller by forwarding claims made by a Buyer under the manufacturer’s
warranty to the manufacturer. The final disposition of such claims will be made by the
manufacturer and ruled by the laws of British Columbia, Canada.
Customer assumes risk in purchasing product with in 30 days may return the product for
exchange of other BD products or services only. No cash refunds are available.
The installation of BD aftermarket parts may void the OE warranty. BD is not responsible for OE
warranties or how they are administered. Residents of the U.S.A. can reference the MagnusonMoss warranty act that protects the consumer on the installation of aftermarket parts, please
research this act to base your decisions accordingly.
In the case the warranty is denied, BD at its discretion may offer to refurbish (where applicable)
the product at discounted rate for the end user.
Please refer to Warranty time limitation per product.
NOT COVERED UNDER THIS WARRANTY
This warranty is limited to the original purchaser of the product and is not transferable to
subsequent owners. Specifically excluded from this warranty are failures of products caused by
misuse, misapplication, negligence of the Buyer, accidents, modification, abuse, improper
storage, installation, repair or operation, use of unauthorized parts or other mistreatment of the
Buyer or his agent. Any competitive use, sled pulling, drag racing will void warranty on product. A
sheared or twisted shaft, broken planetary gear sets, burned clutches, broken drive hubs, sun
gear damage, cracked housings are not covered. Damage caused from debris in oil
contaminated coolers, improper fluids and filters or damage caused from fuel or air
contamination, Biodiesel, low fluid levels are also not covered. This warranty does not cover
deterioration of plating, paint or any other coating, linings or parts that are subject to normal wear
and tear, such as light bulbs, fuses, bearing wear, seal wear, etc.
In the case of BD transmissions, a BD torque convertor must be installed at the time of
installation of the transmission. Use of a 3rd party or OE convertor will invalidate the
transmission warranty.
If product is not installed by a trained and authorized BD dealer, installation facility must prove it
is properly tooled and has certified training to have installed or to carry out repair of product.
The Seller also disclaims any liability for incidental or consequential damages including but not
limited to, repair labor, rental vehicles, hotel cost or any other inconvenience cost. To the extent
permitted by law, this warranty is in lieu of all other warranties or guaranties, either expressed or
implied, included the implied warranties of merchantability and fitness for a particular purpose
and shall not extend to any Buyer or to any person other than the original purchaser residing
within the boundaries of the continental U.S. or Canada. As well the seller is not responsible or
obligated to update previously manufactured parts that are currently under the above warranty.
NOTE THAT THIS GUARANTEE WILL BE VOID IF THE USER BREACHES THE CONDITIONS
IN THE SECTION LABELED “NOT COVERED UNDER THIS WARRANTY” AND IS ONLY
APPLICABLE ON THE PRODUCTS THE SELLER MANUFACTURES.
DISCLAIMER OF LIABILITY
Other than as expressly set forth herein, the Seller, together with its distributors, jobbers and
dealers shall in no way be responsible for the product’s proper use and service. In no event shall
the Seller be liable for any special, incidental, indirect or consequential damages of any kind or
nature, whether or not the Buyer was advised of the possibility of damage, arising or resulting
from the use or performance of the product, and the Buyer hereby waives any and all such
claims.
The Buyer acknowledges that he/she/it is not relying on the Seller’s skill or judgment to select or
furnish goods suitable for any particular purpose and that the Seller has no liability that will
extend beyond the scope of the limited warranty contained herein, and the Buyer hereby waives
all remedies or liabilities, expressed or implied, arising by operation of law or otherwise,
(including, without limitation, any obligations of the Seller with respect to fitness for any particular
purpose; merchantability; and special, incidental, indirect or consequential damages) or whether
or not occasioned by the Seller’s negligence.
The Seller disclaims any warranty and expressly disclaims any liability for personal injury or
damages related to the Buyer’s use of the product. The Buyer acknowledges and agrees that the
disclaimer of any liability for personal injury is a material term for this Agreement and the Buyer
agrees to indemnify the Seller and hold the Seller harmless from any claim related to the product
and its use or performance. Under no circumstances will the Seller be liable for any damages,
liabilities, costs or expenses incurred as a result of by reason of the use, performance or sale of
the product, including without limitation, any damages, liabilities, costs or expenses incurred by
reason of the Buyer’s negligence related to those uses of the product as a result of the removal
of the speed limiter.
The Seller assumes no liability regarding the improper installation or misapplication of the
product. It is the installer’s responsibility to check for proper installation, and, if in doubt, contact
the manufacturer.
Limited Warranty Details
Product Name Parts (Months/Miles)1
Labour
(Months/Miles)
1,2
Notes
Torque Converters (Dodge) 36/ 150,000 12/12,000 No Race abuse covered
Torque Converters (Ford & Allison) 36/ 150,000 12/ 12,000 No Race abuse covered
Transmissions 36/ 150,000 12/ 24,000 No Race abuse covered. Remote filter required for inspection with cooler flow rate in
GPM at Oil/Air transmission cooler outlet. Freight provision allowed.
Race Transmissions 12/ 24,000 Not Eligible
Valve / Accumulators Bodies 12/ 24,000 12/ 24,000
Transmission Pans 36/ 150,000 Not Eligible
Transmission Electronic Control Modules 12 / 24,000 Not Eligible
Flex Plates 36/ 150,000 Not Eligible
Injectors (Mechanical) & Injection Pumps 12 / 24,000 12/ 24,000 Race Pumps 90 days parts/No labour
Performance Injector Nozzles (Common Rail) Not Eligible Not Eligible
No warranty available on this product unless there is documented proof nozzles were
installed by a reputable fuel shop with proper common rail injection test benches and
flow matched. If this is the case the warranty will be 30 days, 90 days if done at BD/VFI.
Increased fuel pressure will void the warranty.
Common Rail Injectors (Stock & Performance) 24 Months (Applicable Nov 2015) Not Eligible
Manufacturing and material defects only covered.
Cracks caused by high fuel pressure not covered.
High Return flow not covered after 12 months on Performance Injectors
Tuners and Chips Manufacturer3 Not Eligible
X-Monitor / Cool Down Timers 12/ 24,000 Not Eligible
Intake / Exhaust Manifolds 36/ 75,000 Not Eligible
Exhaust Up pipes 12/24,000 Not Eligible Surface rust not eligible
Exhaust Kits (BD Brand) 24 Months Not Eligible Surface rust not eligible
Turbo Guards / Boost Builders / Waste Gate Kits 12/ 24,000 Not Eligible
Intercoolers / Hoses / Clamps 12/ 24,000 Not Eligible
Avtek Intercoolers Manufacturer3 Manufacturer3
BD Xtruded Transmission Cooler 12/ 24,000 Not Eligible
Manual Transmission Clutches Manufacturer3 Manufacturer3
Short Shifters 12/ 24,000 Not Eligible
Engine / Head Stud kits Manufacturer3 Manufacturer3
Positive Air Shutoff / Electronic Positive Air Shutoff 24/ 24,000 Not Eligible
Engine Brakes 24/ 24,000 12/ 24,000
Electronic VV Brake 24/ 24,000 Not Eligible
Steering Stabilizers / Sway bars 12/ 24,000 Not Eligible
Gauges and Mounts Manufacturer3 Manufacturer3
OEM Turbos 12 Months/ Unlimited Not Eligible Electrical components have a 30-day warranty
Performance Turbos 12/ 12,000 Not Eligible
ISX Turbos 90 Days Not Eligible Models # HE551VE & HE551V *See Limited Warranty Card
Auxiliary Fuel Pumps 12/ 12,000 Not Eligible
EGR Cooler Delete 12 Months Not Eligible
BD FICM 12 Months Not Eligible
Fuel Control Plate/Pin (VE & P7100) 24 Months Not Eligible
Distributed Product (Not Manufactured by BD) Manufacturer3 Manufacturer3
FlowMAX Fuel Pumps 24/ 48,000 Not Eligible Pump only kits without BD 30u prefilter or Pump/Filter Kits not registered within time period.
FlowMAX Fuel Pump Kit Limited Lifetime Not Eligible
Must register online within 30 days of purchase to be eligible. See
warranty.www.bddiesel.com/flowmax
Applies to 1050301DF, 1050305DF, 1050310DF, 1050311DF, 1050312D, 1050316, 1050320DF,
1050321DF
A Return Material Authorization (RMA) number, obtained in advance from a customer service representative of the Seller and the dated bill of sale or receipt, must accompany any product returned by the buyer for warranty determination.
1 Warranty is based on whichever occurs first (Months or Mileage).
2 Prior approvals must be given to qualify for labour reimbursement.
3 As per Manufacturer’s warranty

Was this article helpful?
0 out of 0 found this helpful